ld/amix-vimrc-mirror
1
0
Fork 0
mirror of https://github.com/amix/vimrc synced 2025-07-22 20:44:59 +08:00
Code Issues Packages Projects Releases Wiki Activity

configurable

Browse Source 
Signed-off-by: shenwenjie <shenwenjie@sensetime.com>
This commit is contained in:
shenwenjie
2021-10-19 12:54:07 +08:00
parent e13b2a10a7
commit 51db5b9267
253 changed files with 627555 additions and 11538 deletions
Download Patch File Download Diff File Expand all files Collapse all files

606
doc/usr_24.txt Normal file
View File

@ -0,0 +1,606 @@
*usr_24.txt* For Vim version 7.4. Last change: 2006 Jul 23
VIM USER MANUAL - by Bram Moolenaar
Inserting quickly
When entering text, Vim offers various ways to reduce the number of keystrokes
and avoid typing mistakes. Use Insert mode completion to repeat previously
typed words. Abbreviate long words to short ones. Type characters that
aren't on your keyboard.
|24.1| Making corrections
|24.2| Showing matches
|24.3| Completion
|24.4| Repeating an insert
|24.5| Copying from another line
|24.6| Inserting a register
|24.7| Abbreviations
|24.8| Entering special characters
|24.9| Digraphs
|24.10| Normal mode commands
Next chapter: |usr_25.txt| Editing formatted text
Previous chapter: |usr_23.txt| Editing other files
Table of contents: |usr_toc.txt|
==============================================================================
*24.1* Making corrections
The <BS> key was already mentioned. It deletes the character just before the
cursor. The <Del> key does the same for the character under (after) the
cursor.
When you typed a whole word wrong, use CTRL-W:
The horse had fallen to the sky ~
CTRL-W
The horse had fallen to the ~
If you really messed up a line and want to start over, use CTRL-U to delete
it. This keeps the text after the cursor and the indent. Only the text from
the first non-blank to the cursor is deleted. With the cursor on the "f" of
"fallen" in the next line pressing CTRL-U does this:
The horse had fallen to the ~
CTRL-U
fallen to the ~
When you spot a mistake a few words back, you need to move the cursor there to
correct it. For example, you typed this:
The horse had follen to the ground ~
You need to change "follen" to "fallen". With the cursor at the end, you
would type this to correct it: >
<Esc>4blraA
< get out of Insert mode <Esc>
four words back 4b
move on top of the "o" l
replace with "a" ra
restart Insert mode A
Another way to do this: >
<C-Left><C-Left><C-Left><C-Left><Right><Del>a<End>
< four words back <C-Left><C-Left><C-Left><C-Left>
move on top of the "o" <Right>
delete the "o" <Del>
insert an "a" a
go to end of the line <End>
This uses special keys to move around, while remaining in Insert mode. This
resembles what you would do in a modeless editor. It's easier to remember,
but takes more time (you have to move your hand from the letters to the cursor
keys, and the <End> key is hard to press without looking at the keyboard).
These special keys are most useful when writing a mapping that doesn't
leave Insert mode. The extra typing doesn't matter then.
An overview of the keys you can use in Insert mode:
<C-Home> to start of the file
<PageUp> a whole screenful up
<Home> to start of line
<S-Left> one word left
<C-Left> one word left
<S-Right> one word right
<C-Right> one word right
<End> to end of the line
<PageDown> a whole screenful down
<C-End> to end of the file
There are a few more, see |ins-special-special|.
==============================================================================
*24.2* Showing matches
When you type a ) it would be nice to see with which ( it matches. To make
Vim do that use this command: >
:set showmatch
When you now type a text like "(example)", as soon as you type the ) Vim will
briefly move the cursor to the matching (, keep it there for half a second,
and move back to where you were typing.
In case there is no matching (, Vim will beep. Then you know that you
might have forgotten the ( somewhere, or typed a ) too many.
The match will also be shown for [] and {} pairs. You don't have to wait
with typing the next character, as soon as Vim sees it the cursor will move
back and inserting continues as before.
You can change the time Vim waits with the 'matchtime' option. For
example, to make Vim wait one and a half second: >
:set matchtime=15
The time is specified in tenths of a second.
==============================================================================
*24.3* Completion
Vim can automatically complete words on insertion. You type the first part of
a word, press CTRL-P, and Vim guesses the rest.
Suppose, for example, that you are creating a C program and want to type in
the following:
total = ch_array[0] + ch_array[1] + ch_array[2]; ~
You start by entering the following:
total = ch_array[0] + ch_ ~
At this point, you tell Vim to complete the word using the command CTRL-P.
Vim searches for a word that starts with what's in front of the cursor. In
this case, it is "ch_", which matches with the word ch_array. So typing
CTRL-P gives you the following:
total = ch_array[0] + ch_array ~
After a little more typing, you get this (ending in a space):
total = ch_array[0] + ch_array[1] + ~
If you now type CTRL-P Vim will search again for a word that completes the
word before the cursor. Since there is nothing in front of the cursor, it
finds the first word backwards, which is "ch_array". Typing CTRL-P again
gives you the next word that matches, in this case "total". A third CTRL-P
searches further back. If there is nothing else, it causes the editor to run
out of words, so it returns to the original text, which is nothing. A fourth
CTRL-P causes the editor to start over again with "ch_array".
To search forward, use CTRL-N. Since the search wraps around the end of the
file, CTRL-N and CTRL-P will find the same matches, but in a different
sequence. Hint: CTRL-N is Next-match and CTRL-P is Previous-match.
The Vim editor goes through a lot of effort to find words to complete. By
default, it searches the following places:
1. Current file
2. Files in other windows
3. Other loaded files (hidden buffers)
4. Files which are not loaded (inactive buffers)
5. Tag files
6. All files #included by the current file
OPTIONS
You can customize the search order with the 'complete' option.
The 'ignorecase' option is used. When it is set, case differences are ignored
when searching for matches.
A special option for completion is 'infercase'. This is useful to find
matches while ignoring case ('ignorecase' must be set) but still using the
case of the word typed so far. Thus if you type "For" and Vim finds a match
"fortunately", it will result in "Fortunately".
COMPLETING SPECIFIC ITEMS
If you know what you are looking for, you can use these commands to complete
with a certain type of item:
CTRL-X CTRL-F file names
CTRL-X CTRL-L whole lines
CTRL-X CTRL-D macro definitions (also in included files)
CTRL-X CTRL-I current and included files
CTRL-X CTRL-K words from a dictionary
CTRL-X CTRL-T words from a thesaurus
CTRL-X CTRL-] tags
CTRL-X CTRL-V Vim command line
After each of them CTRL-N can be used to find the next match, CTRL-P to find
the previous match.
More information for each of these commands here: |ins-completion|.
COMPLETING FILE NAMES
Let's take CTRL-X CTRL-F as an example. This will find file names. It scans
the current directory for files and displays each one that matches the word in
front of the cursor.
Suppose, for example, that you have the following files in the current
directory:
main.c sub_count.c sub_done.c sub_exit.c
Now enter Insert mode and start typing:
The exit code is in the file sub ~
At this point, you enter the command CTRL-X CTRL-F. Vim now completes the
current word "sub" by looking at the files in the current directory. The
first match is sub_count.c. This is not the one you want, so you match the
next file by typing CTRL-N. This match is sub_done.c. Typing CTRL-N again
takes you to sub_exit.c. The results:
The exit code is in the file sub_exit.c ~
If the file name starts with / (Unix) or C:\ (MS-Windows) you can find all
files in the file system. For example, type "/u" and CTRL-X CTRL-F. This
will match "/usr" (this is on Unix):
the file is found in /usr/ ~
If you now press CTRL-N you go back to "/u". Instead, to accept the "/usr/"
and go one directory level deeper, use CTRL-X CTRL-F again:
the file is found in /usr/X11R6/ ~
The results depend on what is found in your file system, of course. The
matches are sorted alphabetically.
COMPLETING IN SOURCE CODE
Source code files are well structured. That makes it possible to do
completion in an intelligent way. In Vim this is called Omni completion. In
some other editors it's called intellisense, but that is a trademark.
The key to Omni completion is CTRL-X CTRL-O. Obviously the O stands for Omni
here, so that you can remember it easier. Let's use an example for editing C
source:
{ ~
struct foo *p; ~
p-> ~
The cursor is after "p->". Now type CTRL-X CTRL-O. Vim will offer you a list
of alternatives, which are the items that "struct foo" contains. That is
quite different from using CTRL-P, which would complete any word, while only
members of "struct foo" are valid here.
For Omni completion to work you may need to do some setup. At least make sure
filetype plugins are enabled. Your vimrc file should contain a line like
this: >
filetype plugin on
Or: >
filetype plugin indent on
For C code you need to create a tags file and set the 'tags' option. That is
explained |ft-c-omni|. For other filetypes you may need to do something
similar, look below |compl-omni-filetypes|. It only works for specific
filetypes. Check the value of the 'omnifunc' option to find out if it would
work.
==============================================================================
*24.4* Repeating an insert
If you press CTRL-A, the editor inserts the text you typed the last time you
were in Insert mode.
Assume, for example, that you have a file that begins with the following:
"file.h" ~
/* Main program begins */ ~
You edit this file by inserting "#include " at the beginning of the first
line:
#include "file.h" ~
/* Main program begins */ ~
You go down to the beginning of the next line using the commands "j^". You
now start to insert a new "#include" line. So you type: >
i CTRL-A
The result is as follows:
#include "file.h" ~
#include /* Main program begins */ ~
The "#include " was inserted because CTRL-A inserts the text of the previous
insert. Now you type "main.h"<Enter> to finish the line:
#include "file.h" ~
#include "main.h" ~
/* Main program begins */ ~
The CTRL-@ command does a CTRL-A and then exits Insert mode. That's a quick
way of doing exactly the same insertion again.
==============================================================================
*24.5* Copying from another line
The CTRL-Y command inserts the character above the cursor. This is useful
when you are duplicating a previous line. For example, you have this line of
C code:
b_array[i]->s_next = a_array[i]->s_next; ~
Now you need to type the same line, but with "s_prev" instead of "s_next".
Start the new line, and press CTRL-Y 14 times, until you are at the "n" of
"next":
b_array[i]->s_next = a_array[i]->s_next; ~
b_array[i]->s_ ~
Now you type "prev":
b_array[i]->s_next = a_array[i]->s_next; ~
b_array[i]->s_prev ~
Continue pressing CTRL-Y until the following "next":
b_array[i]->s_next = a_array[i]->s_next; ~
b_array[i]->s_prev = a_array[i]->s_ ~
Now type "prev;" to finish it off.
The CTRL-E command acts like CTRL-Y except it inserts the character below the
cursor.
==============================================================================
*24.6* Inserting a register
The command CTRL-R {register} inserts the contents of the register. This is
useful to avoid having to type a long word. For example, you need to type
this:
r = VeryLongFunction(a) + VeryLongFunction(b) + VeryLongFunction(c) ~
The function name is defined in a different file. Edit that file and move the
cursor on top of the function name there, and yank it into register v: >
"vyiw
"v is the register specification, "yiw" is yank-inner-word. Now edit the file
where the new line is to be inserted, and type the first letters:
r = ~
Now use CTRL-R v to insert the function name:
r = VeryLongFunction ~
You continue to type the characters in between the function name, and use
CTRL-R v two times more.
You could have done the same with completion. Using a register is useful
when there are many words that start with the same characters.
If the register contains characters such as <BS> or other special characters,
they are interpreted as if they had been typed from the keyboard. If you do
not want this to happen (you really want the <BS> to be inserted in the text),
use the command CTRL-R CTRL-R {register}.
==============================================================================
*24.7* Abbreviations
An abbreviation is a short word that takes the place of a long one. For
example, "ad" stands for "advertisement". Vim enables you to type an
abbreviation and then will automatically expand it for you.
To tell Vim to expand "ad" into "advertisement" every time you insert it,
use the following command: >
:iabbrev ad advertisement
Now, when you type "ad", the whole word "advertisement" will be inserted into
the text. This is triggered by typing a character that can't be part of a
word, for example a space:
What Is Entered What You See
I saw the a I saw the a ~
I saw the ad I saw the ad ~
I saw the ad<Space> I saw the advertisement<Space> ~
The expansion doesn't happen when typing just "ad". That allows you to type a
word like "add", which will not get expanded. Only whole words are checked
for abbreviations.
ABBREVIATING SEVERAL WORDS
It is possible to define an abbreviation that results in multiple words. For
example, to define "JB" as "Jack Benny", use the following command: >
:iabbrev JB Jack Benny
As a programmer, I use two rather unusual abbreviations: >
:iabbrev #b /****************************************
:iabbrev #e <Space>****************************************/
These are used for creating boxed comments. The comment starts with #b, which
draws the top line. I then type the comment text and use #e to draw the
bottom line.
Notice that the #e abbreviation begins with a space. In other words, the
first two characters are space-star. Usually Vim ignores spaces between the
abbreviation and the expansion. To avoid that problem, I spell space as seven
characters: <, S, p, a, c, e, >.
Note:
":iabbrev" is a long word to type. ":iab" works just as well.
That's abbreviating the abbreviate command!
FIXING TYPING MISTAKES
It's very common to make the same typing mistake every time. For example,
typing "teh" instead of "the". You can fix this with an abbreviation: >
:abbreviate teh the
You can add a whole list of these. Add one each time you discover a common
mistake.
LISTING ABBREVIATIONS
The ":abbreviate" command lists the abbreviations:
:abbreviate
i #e ****************************************/
i #b /****************************************
i JB Jack Benny
i ad advertisement
! teh the
The "i" in the first column indicates Insert mode. These abbreviations are
only active in Insert mode. Other possible characters are:
c Command-line mode :cabbrev
! both Insert and Command-line mode :abbreviate
Since abbreviations are not often useful in Command-line mode, you will mostly
use the ":iabbrev" command. That avoids, for example, that "ad" gets expanded
when typing a command like: >
:edit ad
DELETING ABBREVIATIONS
To get rid of an abbreviation, use the ":unabbreviate" command. Suppose you
have the following abbreviation: >
:abbreviate @f fresh
You can remove it with this command: >
:unabbreviate @f
While you type this, you will notice that @f is expanded to "fresh". Don't
worry about this, Vim understands it anyway (except when you have an
abbreviation for "fresh", but that's very unlikely).
To remove all the abbreviations: >
:abclear
":unabbreviate" and ":abclear" also come in the variants for Insert mode
(":iunabbreviate and ":iabclear") and Command-line mode (":cunabbreviate" and
":cabclear").
REMAPPING ABBREVIATIONS
There is one thing to watch out for when defining an abbreviation: The
resulting string should not be mapped. For example: >
:abbreviate @a adder
:imap dd disk-door
When you now type @a, you will get "adisk-doorer". That's not what you want.
To avoid this, use the ":noreabbrev" command. It does the same as
":abbreviate", but avoids that the resulting string is used for mappings: >
:noreabbrev @a adder
Fortunately, it's unlikely that the result of an abbreviation is mapped.
==============================================================================
*24.8* Entering special characters
The CTRL-V command is used to insert the next character literally. In other
words, any special meaning the character has, it will be ignored. For
example: >
CTRL-V <Esc>
Inserts an escape character. Thus you don't leave Insert mode. (Don't type
the space after CTRL-V, it's only to make this easier to read).
Note:
On MS-Windows CTRL-V is used to paste text. Use CTRL-Q instead of
CTRL-V. On Unix, on the other hand, CTRL-Q does not work on some
terminals, because it has a special meaning.
You can also use the command CTRL-V {digits} to insert a character with the
decimal number {digits}. For example, the character number 127 is the <Del>
character (but not necessarily the <Del> key!). To insert <Del> type: >
CTRL-V 127
You can enter characters up to 255 this way. When you type fewer than two
digits, a non-digit will terminate the command. To avoid the need of typing a
non-digit, prepend one or two zeros to make three digits.
All the next commands insert a <Tab> and then a dot:
CTRL-V 9.
CTRL-V 09.
CTRL-V 009.
To enter a character in hexadecimal, use an "x" after the CTRL-V: >
CTRL-V x7f
This also goes up to character 255 (CTRL-V xff). You can use "o" to type a
character as an octal number and two more methods allow you to type up to
a 16 bit and a 32 bit number (e.g., for a Unicode character): >
CTRL-V o123
CTRL-V u1234
CTRL-V U12345678
==============================================================================
*24.9* Digraphs
Some characters are not on the keyboard. For example, the copyright character
(<28>). To type these characters in Vim, you use digraphs, where two characters
represent one. To enter a <20>, for example, you press three keys: >
CTRL-K Co
To find out what digraphs are available, use the following command: >
:digraphs
Vim will display the digraph table. Here are three lines of it:
AC ~_ 159 NS | 160 !I <20> 161 Ct <20> 162 Pd <20> 163 Cu <20> 164 Ye <20> 165 ~
BB <20> 166 SE <20> 167 ': <20> 168 Co <20> 169 -a <20> 170 << <20> 171 NO <20> 172 ~
-- <20> 173 Rg <20> 174 'm <20> 175 DG <20> 176 +- <20> 177 2S <20> 178 3S <20> 179 ~
This shows, for example, that the digraph you get by typing CTRL-K Pd is the
character (<28>). This is character number 163 (decimal).
Pd is short for Pound. Most digraphs are selected to give you a hint about
the character they will produce. If you look through the list you will
understand the logic.
You can exchange the first and second character, if there is no digraph for
that combination. Thus CTRL-K dP also works. Since there is no digraph for
"dP" Vim will also search for a "Pd" digraph.
Note:
The digraphs depend on the character set that Vim assumes you are
using. On MS-DOS they are different from MS-Windows. Always use
":digraphs" to find out which digraphs are currently available.
You can define your own digraphs. Example: >
:digraph a" <20>
This defines that CTRL-K a" inserts an <20> character. You can also specify the
character with a decimal number. This defines the same digraph: >
:digraph a" 228
More information about digraphs here: |digraphs|
Another way to insert special characters is with a keymap. More about that
here: |45.5|
==============================================================================
*24.10* Normal mode commands
Insert mode offers a limited number of commands. In Normal mode you have many
more. When you want to use one, you usually leave Insert mode with <Esc>,
execute the Normal mode command, and re-enter Insert mode with "i" or "a".
There is a quicker way. With CTRL-O {command} you can execute any Normal
mode command from Insert mode. For example, to delete from the cursor to the
end of the line: >
CTRL-O D
You can execute only one Normal mode command this way. But you can specify a
register or a count. A more complicated example: >
CTRL-O "g3dw
This deletes up to the third word into register g.
==============================================================================
Next chapter: |usr_25.txt| Editing formatted text
Copyright: see |manual-copyright| vim:tw=78:ts=8:ft=help:norl: